Jersey City’s Marin Avenue Intersection Gets A Makeover!

When thinking about concrete the image that pops up is the same old cold, grey, road markings, lifeless, and hard surface of the driveways and sidewalks. Stamped concrete gives one the option of exploring the boundaries of versatility if the material. Besides its beauty and wide appeal, these types of cement have practical uses. They can be transformed into a more extraordinary decorative surface. 



Take the case of Marin Ave in downtown Jersey City. The extremely busy intersection was recently updated with installation of Endurablend as a decorative treatment. The application of the ultra-thin (1/8’’) surface treatment for asphalt immediately elevates the lifespan of the concrete surface, while providing a rich aesthetic appeal to it.

Comments

Post a Comment

Popular posts from this blog

Why Are Good Road Markings Important?

Image
Usually, pedestrians traveling through crosswalks or sidewalks depend upon the signage and markings along the road to guide them and direct them towards the correct direction. Typically, only a glance at these markings is enough to guide us along the path. If these markings and signs are not appropriate or incur some wear and tear, it can be risky for the pedestrian. Also, if the experts do not overlay crosswalks with some form of a   decorative concrete surface, then the overall dull grey look becomes too weary to walk on. With this philosophy in mind, the City of Las Vegas embraced new-age concrete overlay technologies. They used thermoplastic with a brick pattern on a crosswalk. The application of Endurablend removed the issue with bonding and premature wear and tear.  The problem  Due to the conditions of the street and crosswalk, the markings wore off quickly from the concrete or asphalt surfaces. The existing materials used in the concrete overlay was not aesthetically
Read more

Importance of Airport Runway and Taxiway Markings

Image
Airport signs and pavement markings provide useful information to the pilot during landing, takeoff and taxiing. The safety and efficiency improve when there is uniformity in airport signs and markings from one airport to another. When pilots encounter incorrect, ineffective, or confusing markings or symbols on an airport, they should immediately make the operator management of the airport aware of the problem. Airport markings usually contain runway marking, taxiway marking, holding position marking, and other markings as well. Let us describe the importance of these markings on the airport. Runway Markings Runway Markings have white markings. They are of three types, i.e. non-precision instrument, precision instrument, and visual. The determination of runway numbers and letters is done from the approach direction. It is a whole number nearing the one-tenth and measured clockwise from the magnetic north. The runway centerline marking marks the center of the runway and pro
Read more

Taxiway Surface Marking

Image
Taxiways are defined as the paths that are used for the taxiing of aircraft from one part of an airport to another. Taxiway centerlines are marked to provide a visual identification of the designated taxiing path. Have you ever been to the airport or had an aircraft trip experience? When you are inside the aircraft, and when you are peeping through the window when landing or take off, you might have looked at some yellow, white, or black lines moving towards the runway, right? These are called the taxiway lines. It is the line that connects the runway with several other areas of the airport. These taxiways are made of the concrete or asphalt, and they are similar to the runway surfaces, but it is pretty solid. These taxiways will connect with the terminal, runway, or the hangar. Generally, only some authorized people, such as the airport personnel like pilots, will be allowed inside the taxiway due to some security reasons. The different aspects like the signs, lights with di
Read more