Reasons why city planners always rely on us when they need green bicycle road markings


Bike lane markings are used to designate areas of the road that are used by bicyclists. It allows motorists and bicyclists to drive separately from one another, which creates a safe traffic environment for everyone on the road. Here at Pavement Surface Coatings LLC, we help our clients to create the following types of biking lanes:
  •        Conventional Bike Lanes: Used to designate lanes for bicyclists driving in parallel with motorists and bus drivers.
  •        Left-side Bike Lanes: Designate biking lanes on one-way streets divided by a median
  •        Buffered Bike Lanes: These add space between the bicyclist and the parking lane
  •        Contra-Flow Bike Lanes: These are lanes for bicyclists going against the flow of traffic
  •        Cycle tracks: Used for tracks where there is no motor traffic
  •      Spot Treatment in Areas of Conflict: These are typically used at intersections, and they give bicyclists a place to stop and wait to cross


Location: East Hanover, NJ 07936, USA

Comments

Post a Comment

Popular posts from this blog

Asphalt & Concrete Micro Surfacing

Image
Endurablend was designed as a thin, 1/8” thick micro surfacing overlay treatment for asphalt and concrete pavements on roadways, bridge decks, airports and parking lots.  Endurablend will seal the surface from salts, de-icing materials and is UV stable and fuel resistant.  Endurablend can be used for preventative maintenance or as a rehabilitation material.  In either case, Endurablend will significantly improve the overall appearance of the pavement as well as improve rideability and extend the life of the pavement.  Endurablend is also being used as a crack filling material and as a pavement marking material for concrete surfaces. Bridge Decks Airports Roadways Parking Lots Pavement Joints and Seams Pavement Markings And More…
Read more

Importance of Airport Runway and Taxiway Markings

Image
Airport signs and pavement markings provide useful information to the pilot during landing, takeoff and taxiing. The safety and efficiency improve when there is uniformity in airport signs and markings from one airport to another. When pilots encounter incorrect, ineffective, or confusing markings or symbols on an airport, they should immediately make the operator management of the airport aware of the problem. Airport markings usually contain runway marking, taxiway marking, holding position marking, and other markings as well. Let us describe the importance of these markings on the airport. Runway Markings Runway Markings have white markings. They are of three types, i.e. non-precision instrument, precision instrument, and visual. The determination of runway numbers and letters is done from the approach direction. It is a whole number nearing the one-tenth and measured clockwise from the magnetic north. The runway centerline marking marks the center of the runway and...
Read more

Why Are Good Road Markings Important?

Image
Usually, pedestrians traveling through crosswalks or sidewalks depend upon the signage and markings along the road to guide them and direct them towards the correct direction. Typically, only a glance at these markings is enough to guide us along the path. If these markings and signs are not appropriate or incur some wear and tear, it can be risky for the pedestrian. Also, if the experts do not overlay crosswalks with some form of a   decorative concrete surface, then the overall dull grey look becomes too weary to walk on. With this philosophy in mind, the City of Las Vegas embraced new-age concrete overlay technologies. They used thermoplastic with a brick pattern on a crosswalk. The application of Endurablend removed the issue with bonding and premature wear and tear.  The problem  Due to the conditions of the street and crosswalk, the markings wore off quickly from the concrete or asphalt surfaces. The existing materials used in the concrete overlay was...
Read more